- Waterproof Sealant

– Box Gutters , Roofs

– Balconies and decks

- Masonry and plaster

– Rock / Coal / Steel / Bitumen

– Concrete and bricks

- Most primed metals

- Clay or sand surfaces

- Cement and asbestos

Please refer to the Specific Project for step-by-step instructions.

General Instruction

1. Apply products to clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease etc. Use a Powerwascher to clean the surface.

2. Designed to be mixed with Tough Coat Hardener and oxides to produce a high build coating (extremely flexible and very strong).

3. Allow Waterproof Sealant to cure for 24 hours before applying the Tough Coat Mixture.

4. Broadcast Grit between Waterproof Sealant and the Tough Coat Mixture for optimal adhesion and grip.

The Tough Coat is applied at a rate of 1L / m2.

Use water if product is wet and solvents if product is dry.

Store in a cool dry place. Keep out of reach of children. This product is a Non-flammable-liquid and does not present any storage or transportation hazards.

Liquid Rubber DIY - TOUGH COAT - TDS

LIquid Rubber DIY - TOUGH COAT - SDS

We ship our Products throughout Australia and New Zealand.  

FREE SHIPPING APPLIED TO ALL ORDERS WITHIN AUSTRALIA

Expected shipment duration:  3-8 Business days within Australia and 6 -26 Days on New Zealand orders.

For larger orders, please contact us at info@liquidrubberdiy.com or use the Contact form.

Step 1: Mix the Tough Coat Hardener with 200mm - 300mm of water and stir well with a drill mixer.

Step 2: Pour the mixture into the 15L Tough Coat Bucket and stir it well with a drill mixer.

Note: The Tough Coat Hardener starts to react immediately after mixing it with water. Use up the product within 2h.